* Astronomy

Members Login
Username 
 
Password 
    Remember Me  
Post Info
TOPIC: The Opportunity rover


L

Posts: 131433
Date:
RE: The Opportunity rover
Permalink  
 


OPPORTUNITY UPDATE: Inspecting 'Bellemont' - sol 729-735, Feb 16, 2006:

Opportunity has completed its work on the "Olympia" outcrop. This week's activities included a Moessbauer spectrometre integration on target "Rough Rider," an alpha particle X-ray spectrometre integration on target "Fala," and a short drive to "Bellemont." Also the rover took microscopic imager mosaics of four targets at Bellemont. A team continuing to study occasional problems with the shoulder joint in Opportunity's robotic arm planned a series of diagnostic motions for the arm for sol 735.

Sol-by-sol summaries:

Sol 729 (Feb. 10, 2006): Opportunity continued using the Moessbauer spectrometre on Rough Rider and performed targeted remote sensing.

Sol 730: The rover finished using the Moessbauer spectrometre on Rough Rider, made atmospheric observations, and used the alpha particle X-ray spectrometre overnight on target Fala.

Sol 731: The rover stowed its arm, made a short drive to Bellemont and then unstowed the arm. This pattern of stow, drive and unstow is what the team intends to use for longer drives.

Sol 732: Opportunity used the microscopic imager at Bellemont. Four targets were identified. Opportunity acquired images of three ("Vicos," "Tara" and "Chaco") before a stall in the shoulder joint's azimuth motor halted the sequence.

Sol 733: Opportunity continued using the microscopic imager at Bellemont. Opportunity acquired images from the fourth target ("Verdun"), but a stall stopped the arm before it could get the last two planned images of the Chaco target.

Sol 734: The plan for this sol was to stow the arm, drive about 36 metres to an area known as "Zane Grey," and unstow the arm. The arm stalled just before it reached the ready position (before stowing), and the drive did not occur.

Sol 735 (Feb. 16, 2006): The plan for this sol includes remote sensing and a short diagnostic activity for the arm.

Total odometry as of sol 735: 6518.87 metres.

__________________


L

Posts: 131433
Date:
Permalink  
 

OPPORTUNITY UPDATE: Finishing Up at 'Olympia' - sol 723-728, Feb 10, 2006:

Opportunity is healthy. The rover is in the midst of a robotic-arm and remote-sensing campaign on a feature informally named "Roosevelt." Last week Opportunity used its microscopic imager, Moessbauer spectrometer and alpha particle X-ray spectrometer to examine "Overgaard."

The short-term goal is to finish studying the "Olympia" outcrop by mid next week. The final feature that will be characterised in this location is called "Bellemont."

Sol-by-sol summaries:

Sol 723 (Feb. 4, 2006): Finished the microscopic-imager mosaic on Overgaard.

Sol 724: Stowed the robotic arm in the hover position. Attempted a short drive to Roosevelt, but the drive ended early due to suspension limits.

Sol 725: Succeeded in short drive to Roosevelt.

Sol 726: Used alpha particle X-ray spectrometer and Moessbauer spectrometer on a target called "Rough Rider."

Sol 727: Used the microscopic imager for an image mosaic of Roosevelt.

Sol 728: Continued using the Moessbauer spectrometer on Rough Rider.
Acquired high-resolution images of surrounding outcrops with the panoramic camera.

Total odometry as of sol 728 (Feb. 9, 2006): 6,509.8 meters.

__________________


L

Posts: 131433
Date:
Permalink  
 

Sol 725

Expand (148kb, 1022 x 512)

__________________


L

Posts: 131433
Date:
Permalink  
 

OPPORTUNITY UPDATE: Mozart on Mars - sol 715-721, Feb 02, 2006:

Opportunity is healthy and is continuing the characterization of an outcrop called "Olympia." The rover is on top of a feature called "Overgaard." The plan is to complete a mosaic with the microscopic imager, then drive toward a feature called "Roosevelt" and examine it with tools on the robotic arm.

The informal names of targets on Overgaard are related to Mozart, marking his 250th birthday on Jan. 27.

Sol-by-sol summaries:

Sol 715 and 716 (Jan. 27 and 28, 2006): Used the microscopic imager on "Branchwater" and "Bourbon."

Sol 717: Bumped to Overgaard to do an extensive mosaic with the microscopic imager.

Sol 718: Conducted untargeted remote sensing (atmospheric science).

Sol 719: Planned use of the microscopic imager on targets "Don_Giovanni," "Salzburg" and "Nachtmusik," but a robotic arm error occurred during the work on Salzburg.

Sol 720: Conducted untargeted remote sensing.

Sol 721 (Feb. 2, 2006): Cleared the errors for another attempt to use the microscopic imager on Overgaard.

Opportunity's total odometry as of sol 721 is 6,505 metres.

__________________


L

Posts: 131433
Date:
Opportunity Sol 713
Permalink  
 


Opportunity Sol 713

Expand (181kb, 824 x 636)



__________________


L

Posts: 131433
Date:
RE: The Opportunity rover
Permalink  
 


OPPORTUNITY UPDATE: Opportunity Takes Microscopic Images, Collaborates with European Mars Mission - sol 708-714, Jan 27, 2006:

Opportunity remains healthy following another busy week. The main activity of the week was taking microscopic images of a feature nicknamed "Lower Overgaard." The science team identified individual, high-priority targets of interest, nicknamed "Scotch," "Bourbon," and "Branchwater." After the microscopic imager successfully acquired images of "Scotch," one of the actuator motors on Opportunity's robotic arm (Joint 2, which controls elevation) stalled less than 1 milliradian from its final position. Engineers performed diagnostic activities on Joint 2 over the weekend and determined that the actuator appeared to function properly. Opportunity resumed work with the microscopic imager but was unsuccessful because of a stall on the Joint 1 actuator. Engineers increased the electrical resistance and Opportunity again began acquiring microscopic images.

This past week, Opportunity also supported coordinated observations with the European Space Agency's Mars Express spacecraft, using the miniature thermal emission spectrometer and panoramic camera, and also took images of a transit across the sun by Phobos. Science team members next plan to adjust the rover's position slightly to conduct microscopic analysis of another target area, nicknamed "Upper Overgaard."

Sol-by-sol summaries:

Sol 708 (Jan. 21, 2006): Opportunity took microscopic images of a surface target dubbed Scotch on Lower Overgaard. Microscopic imaging was successful, but the Joint 2 (elevation) actuator motor on the rover's robotic arm stalled less than 1 milliradian from its final position.

Sol 709: Opportunity conducted diagnostics of Joint 2 during the weekend and acquired images of a Phobos transit.

Sol 710: Opportunity conducted remote science observations and supported Mars Express observations using the miniature thermal emission spectrometer and panoramic camera.

Sol 711: Opportunity took thumbnail images of the sky and images of Mars' albedo (a measure of surface reflectivity) with the panoramic camera in support of a coordinated observations by Mars Express.

Sol 712: Opportunity took super-high-resolution images of targets known as "Loupp" and "Dewey" with the panoramic camera.

Sol 713: As Opportunity began executing a plan to take microscopic images of the Bourbon target on Lower Overgaard, a joint on the rover's robotic arm (Joint 1, which controls shoulder azimuth) stalled, preventing acquisition of the microscopic images.

Sol 714 (Jan. 27, 2006): Opportunity re-acquired some of the microscopic images of the target Scotch that were not fully in focus when first taken on sol 708 (Jan. 21, 2006).

As of sol 714, Opportunity's total odometry remained at 6504.55 meters.

__________________


L

Posts: 131433
Date:
Victoria Crater
Permalink  
 



Victoria Crater

__________________


L

Posts: 131433
Date:
RE: The Opportunity rover
Permalink  
 


Two years ago, the Mars Exploration Rover, Opportunity, landed on Meridiani Planum. The rover marked its first Mars-year (687 Earth Days) anniversary in December 2005.

During the landing in January 2004, rockets were fired to slow the final descent, just before the inflated airbags (containing the folded-up lander and rover) were released. The rockets disturbed the sandy surface at the location labelled "blast effects." Following release, the airbags bounced and rolled until coming to rest inside Eagle Crater. The lander, in fact, can be seen as a bright spot near the centre of Eagle Crater. Meanwhile, the jettisoned parachute and backshell landed to the southwest of Eagle, and the heatshield fell just southwest of Endurance Crater.

Opportunity initially examined sedimentary rock outcrops and sandy, windblown regolith within Eagle Crater. Then it was driven by the rover team out of Eagle and on into Endurance Crater. By the end of 2004, Opportunity had left Endurance and was investigating the site where the heatshield impacted the surface. After that, the rover spent much of the year 2005 driving from the heatshield location down to the shallow Erebus Crater.


Expand (1.6mb)
Expand (6.3mb)
Location near: 2.0°S, 5.6°W

Long-term plans call for driving Opportunity from Erebus to Victoria Crater, where a substantially thicker sequence of layered rock is expected to be found, relative to previous outcrops examined in the craters Endurance and Eagle.

__________________


L

Posts: 131433
Date:
Permalink  
 

This image from the panoramic camera on the Mars Exploration Rover Opportunity shows the best examples yet seen in Meridiani Planum outcrop rocks of well-preserved, fine-scale layering and what geologists call "cross-lamination." Opportunity acquired this image of a rock called "Overgaard" at the edge of "Erebus Crater" during the rover's 690th Martian day (Jan. 2, 2006).

This image was obtained in the late afternoon (4:15 p.m. local solar time) using the panoramic camera's 430-nanometer filter.


Medium Image (399 kB) | Large (1.0 MB)
Image credit: NASA/JPL-Caltech/Cornell

The uppermost part of the rock, just above the centre of the image and in the enlargement at top, shows distinctive centimetre-sized, smile-shaped features that sedimentary geologists call "festoons."
The detailed geometric patterns of such nested sets of concave-upward layers in sedimentary rocks imply the presence of small, sinuous sand ripples that form only in water on Earth. Similar festoon cross-lamination and other distinctive sedimentary layer patterns are also visible in the lower parts of the rock, just left of centre, and in other rocks near the rim of Erebus. Essentially, these features are the preserved remnants of tiny (centimetre-sized) underwater sand dunes formed long ago by waves in shallow water on the surface of Mars.

-- Edited by Blobrana at 00:12, 2006-01-22

__________________


L

Posts: 131433
Date:
Erebus
Permalink  
 


This Bird's-Eye View of 'Erebus' combines frames taken by the panoramic camera on the Opportunity rover's 652nd through 663rd Martian sols (Nov. 23 to Dec. 5, 2005), at the edge of "Erebus Crater."
The mosaic is presented as a vertical projection. This type of projection provides a true-to-scale overhead view of the rover deck and nearby surrounding terrain. The view here shows outcrop rocks, sand dunes, and other features out to a distance of about 25 meters from the rover.

Opportunity examined targets on the outcrop called "Rimrock" in front of the rover, testing the mobility and operation of Opportunity's robotic arm. The view shows examples of the dunes and ripples that Opportunity has been crossing as the rover drives on the Meridiani plains.


Medium (209kb, 1024 x 1024)
Large (60MB)
Image credit: NASA/JPL-Caltech/Cornell
This view is a false-colour composite of images taken through the camera's 750-nanometer, 530-nanometer and 430-nanometer filters. This kind of false-colour scheme emphasizes differences in composition among the different kinds of materials that the rover is exploring.

__________________
«First  <  149 50 51 52 5355  >  Last»  | Page of 55  sorted by
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard